Monitors

HDMI 2.1 vs DisplayPort for Gaming: Which Cable Should You Use?

HDMI 2.1 carries up to 48Gbps, DisplayPort 1.4 carries 32.4Gbps and DisplayPort 2.1 reaches 80Gbps. Here is what those numbers mean for 4K high-refresh gaming, and which port to plug into.

Most gaming monitors and graphics cards have both HDMI and DisplayPort, and for a lot of setups either will work identically. The differences only start to matter at high resolutions and refresh rates — and there, the version number matters more than the connector type.

Bandwidth is the whole story

Resolution, refresh rate and colour depth all multiply together into a data rate. A connection can only carry a signal uncompressed if its bandwidth is high enough. These are the maximum link rates for each standard:

Standard Maximum bandwidth
DisplayPort 1.4 32.4 Gbps
HDMI 2.1 48 Gbps
DisplayPort 2.1 (UHBR10) 40 Gbps
DisplayPort 2.1 (UHBR13.5) 54 Gbps
DisplayPort 2.1 (UHBR20) 80 Gbps

Two things stand out. First, HDMI 2.1 has more bandwidth than DisplayPort 1.4, which surprises people who assume DisplayPort is always the “PC” choice. Second, “DisplayPort 2.1” is not one speed. A port labelled DP 2.1 may run at any of three rates, and a monitor or graphics card only gets the top speed if it specifically supports UHBR20.

Display Stream Compression fills the gap

Display Stream Compression (DSC) is a compression method that VESA describes as visually lossless. It lets a link carry a signal that would otherwise exceed its bandwidth. This is how DisplayPort 1.4 monitors manage 4K at 144Hz or 240Hz: without DSC, DisplayPort 1.4 tops out at around 4K 120Hz with 8-bit colour.

In normal use DSC is not something you will notice in the image. Its drawbacks are practical rather than visual: depending on the graphics card and driver, it can limit how many monitors you can run at once or interfere with certain scaling features. If you can run uncompressed, that is one less thing to troubleshoot. If you cannot, DSC is a perfectly good solution.

What your graphics card supports

  • GeForce RTX 50 series: DisplayPort 2.1 at up to UHBR20, plus HDMI 2.1.
  • Radeon RX 9000 series: DisplayPort 2.1 at up to UHBR13.5, plus HDMI 2.1.
  • GeForce RTX 40 series: DisplayPort 1.4a, plus HDMI 2.1. On these cards, HDMI is the higher-bandwidth output.
  • Radeon RX 7000 series: DisplayPort 2.1 at up to UHBR13.5, plus HDMI 2.1.

The monitor has to match. A DisplayPort 2.1 graphics card connected to a DisplayPort 1.4 monitor runs at DisplayPort 1.4 speeds.

Variable refresh rate

Both connections support variable refresh rate with current graphics cards: FreeSync and G-Sync Compatible work over DisplayPort and over HDMI 2.1. On older monitors, G-Sync was often limited to DisplayPort, so check the manual if your screen is a few years old. We cover the technology in more detail in G-Sync vs FreeSync.

Consoles are simpler: the PlayStation 5 and Xbox Series X have HDMI only. For 4K at 120Hz with VRR from a console, you need an HDMI 2.1 port on the display and an Ultra High Speed HDMI cable.

Cables matter more than they used to

At these speeds, an old cable is a common cause of black screens, flickering or a missing refresh rate option.

  • HDMI 2.1: look for a certified Ultra High Speed HDMI cable.
  • DisplayPort 2.1: look for DP40 or DP80 certification. DP80 is needed for UHBR20, and passive DP80 cables are short — typically around a metre.
  • DisplayPort 1.4: a certified DP8K cable is the safe choice.

The cable that came in the box with your monitor is almost always the right one to use.

Which port should you use?

  • 1440p up to 240Hz, or 4K up to 120Hz: either works. Use DisplayPort on PC by habit; it leaves HDMI free for a console.
  • 4K at 144Hz and above on an RTX 40 series card: HDMI 2.1 has more bandwidth than the card’s DisplayPort 1.4a output, so it may need less compression.
  • 4K at 240Hz on a DisplayPort 2.1 monitor with a matching GPU: use DisplayPort with a DP80 cable.
  • Console: HDMI 2.1.
  • Daisy-chaining monitors: DisplayPort only.

What about HDMI 2.2?

HDMI 2.2 was announced in January 2025 and doubles bandwidth to 96 Gbps with a new “Ultra96” cable. According to the HDMI Licensing Administrator, speaking at Computex 2026, the first products using the full 96 Gbps are expected in 2027. It is not a reason to delay buying a monitor today.

Looking for a screen? See our 4K and OLED gaming monitor guides.

Frequently asked questions

Is DisplayPort better than HDMI for gaming?

Not automatically. HDMI 2.1 has more bandwidth than DisplayPort 1.4. DisplayPort 2.1 at UHBR20 has more than HDMI 2.1. Compare the versions on your specific monitor and graphics card.

Does HDMI 2.1 support 144Hz at 4K?

Yes. HDMI 2.1 at its full 48 Gbps can carry 4K at 144Hz, and higher refresh rates with DSC, provided both the monitor and graphics card support it.

Does DSC reduce image quality?

It is technically lossy, but it is designed to be visually lossless and in practice you are very unlikely to see a difference in games or desktop use.

The shortlist, monthly

What changed, what dropped in price, and what we would buy now. No spam.

Leave a comment

Your email address will not be published. Required fields are marked *

Cookie preferences

Choose what this site is allowed to store. Your choice is remembered for 12 months.

Strictly necessary Always on

Required for the site to function — page delivery, security, and remembering this choice. Never used for tracking.

Analytics

Anonymous statistics about which guides get read, so we know what to update next. No personal profiles.

Marketing

Lets retailers attribute a purchase to this site so we earn a commission. Declining does not change any price you pay.